弹性屈曲梁在参数激励下的倍周期分叉

考虑一端具有干摩擦的屈曲梁在轴向激励下的非线性振动系统，利用Ｆｌｏｑｕｅｔ理论和谐波平衡法，研究了系统中初始屈曲度、阻尼、频率、激励振幅等各种物理参数对１／２业谐共振情况下倍周期分叉的影响，其规律与以往的数值模拟结果具有很好的一致性。     

含三次耦合项的两自由度Duffing系统的共振及混沌行为

研究了一类含三次耦合项的两自由度Duffing系统的动力学行为。首先应用多尺度方法近似求解系统的一阶稳态响应。通过讨论系统的主共振和1∶1内共振,分析了三次耦合项对系统响应的影响。随后研究系统随外加周期力强度变化的分岔过程,发现除了常见的倍周期分岔通向混沌外,还存在一种直接由周期运动进入混沌的突发路径。结合对系统的最大Lyapunov指数,相轨图及Poincar啨映射的分析验证了上述结论。     

Cooling of Al-Cu-Fe-Cr-Ni high entropy alloy with different size

Cooling rate is critical in synthesizing nanoparticles (NPs), which determines the microstructure and the corresponding mechanical, thermal and electrical properties. This research, as the most initiative one, studies microstructure formation of three different sized high entropy alloy (HEA) NPs under three different cooling rates, employing molecular dynamics (MD). Through analysis of potential energy, “common neighbor analysis”, radial distribution function, and also the mean square displacement, it is found that phase transition temperature is independent of HEA NP size, and as cooling rate decrease, more amorphous atoms transform to fcc and hcp orders, which can alternate the mechanical and thermodynamic properties of the final structure. The Cr atoms are found to aggregate into one cluster inside the NP and also try to migrate to the surface of the HEA NP, due to the large diffusivity. This research provides new insights in the size dependency of the nanoparticles, which may motivate more applications in which the strong size dependency is not desirable.     

On a class of dependent Sparre Andersen risk models and a bailout application

In this paper a one-dimensional surplus process is considered with a certain Sparre Andersen type dependence structure under general interclaim times distribution and correlated phase-type claim sizes. The Laplace transform of the time to ruin under such a model is obtained as the solution of a fixed-point problem, under both the zero-delayed and the delayed cases. An efficient algorithm for solving the fixed-point problem is derived together with bounds that illustrate the quality of the approximation. A two-dimensional risk model is analyzed under a bailout type strategy with both fixed and variable costs and a dependence structure of the proposed type. Numerical examples and ideas for future research are presented at the end of the paper.     

基于DID模型的ITS对北京交通拥堵改善的研究:评价期的视角

采用双重差分模型,基于智能交通系统(ITS)效用发挥滞后时间为3年,选择2010年和2014年作为评价时点对ITS实施效果和北京交通拥堵之间的相关性进行分析.DID模型计量分析的最终结果显示,ITS效果的发挥明显改善了北京交通拥堵问题.为了验证评价结果的可信度,通过改变评价时点这一参数对评价结果进行稳健性检验,结果仍显示ITS效应发挥对北京交通拥堵改善有很大的促进作用.     

弹道明胶老化初级阶段的模型

用流变震荡模式研究了10 wt%浓度的弹道明胶在冷却和等温下的老化行为.对明胶从sol-gel点冷却到某个目标温度的过程,通过不同冷却速率的实验,建了一个弹性模量与温度的线性关系.不同温度下明胶的等温老化实验表明,弹性模量-时间曲线具有相似的形状.依据Normand提出的二级反应动力学模型,引入一个表征明胶老化行为的速率常数,构建了一个预测弹道明胶在老化初级阶段的弹性模量演化的模型.该模型中模量-温度关系在初始和无穷大时是直线,其他模量-温度线是近似直线,并交于sol-gel点.老化速率常数和过冷度之间符合Flory-Weaver方程.对弹性模量和老化时间进行归一化处理,可将不同温度下的老化曲线叠加成一条主曲线.     

Modern information technologies in construction of kinetic models for reactions of metal complex catalysis

For detailed study of complex chemical reactions mechanisms experiment is conducted for selected private reactions. This causes a problem of kinetic parameters getting—the same set of rate constants must describe both public and private reaction stages, and also a general mechanism. In this paper, solution of this problem for a reaction of olefins hydroalumination is proposed. To optimize the computational process a methodology of parallelization is elaborated. On the base of parallel computations, a kinetic model for the reaction assigned is constructed, and on its base, the physical and chemical conclusions about reaction mechanism are done.     

A numerical and experimental study to evaluate performance of vascularized cooling plates

The present paper reports on a numerical simulation and experimental validation of fluid flow and conjugate heat transfer characteristics of new vascular channels, whose cross-sections are semi-circular. The numerical analysis covers the Reynolds number range of 30−2000, with a cooling channel volume fraction of 0.04, pressure drop range of 30−10⁵ Pa. Six flow configurations were considered: first, second, and third constructal structures with optimized hydraulic diameters and non-optimized hydraulic diameter for each system size 10 × 10, 20 × 20, and 50 × 50, respectively. The numerical results of the proposed vascular channels show that the channel configurations of the optimized constructs show much lower flow resistance and temperature distribution than those of the non-optimized constructs. It is also shown that the power component in the power-law relationship between mass flow rate and pressure drop decreases as the system size and mass flow rates increase. The numerical results are validated by experimental data, and with the two exhibiting excellent agreement in all cases. The validation study against the experimental data shows that the presented numerical model is a reliable tool for predicting the performance of cooling plates under practical operating conditions and for the design of self healing or cooling system.     

主惯导旋转调制对传递对准性能的影响

旋转调制技术在调制惯性器件常值误差,有效提高惯导系统长航时导航精度的同时,也引入了由系统旋转而造成的速度误差以旋转周期和旋转周期二倍频波动,这种波动对以速度为匹配量的传递对准有一定的影响。从旋转调制系统的误差特性出发,分析了旋转调制对以速度为匹配量传递对准的有利和不利影响,并针对不同的旋转调制周期进行了仿真验证,仿真结果表明当旋转周期远大于舒勒周期时,旋转调制引起的不利和有利影响都很小,可忽略不计;当旋转周期远小于舒勒周期时,旋转调制可提高子惯导的方位对准精度,但延长了系统的传递对准时间。例如,当旋转周期为3(°)/s时,水平对准时间由3 min延长到4 min,而对准精度由1.2′提高到0.2′;方位对准时间由10 min延长到16 min,而对准精度由2.2′提高到0.4′。